Specification	Detail
Model	9JYY-4.5
Max Payload	4,500 kg
Bale Compatibility	1,000–1,400 mm diameter
Power Required	≥50 kW
Hydraulic System	Dual drive, ≥16 MPa
Transport Speed	Up to 40 km/h
Wheel Config	Dual-axle four-wheel
Chassis Weight	3,240 kg

Commercial Bale Logistics for High-Volume Operations

The Ever-Power 9JYY-4.5 is built for commercial baling operations where bale transport efficiency is as important as baling speed. Handling 4,500 kg per load — typically 3–4 large round bales — the 9JYY-4.5 reduces the number of transport cycles required to clear a paddock after baling, keeping the baling tractor moving without waiting for the transport tractor to clear accumulated bales from the working area.

The dual hydraulic drive system and dual-axle four-wheel configuration are engineering choices that reflect the higher loads and longer transport distances typical of commercial baling operations. Two hydraulic drive circuits provide redundancy — if one circuit develops a fault, the machine can continue operating on the remaining circuit at reduced capacity rather than stopping entirely. Four wheels on dual axles distribute the 3,240 kg chassis plus 4,500 kg payload across a wider footprint than two-wheel alternatives, reducing ground pressure and minimising soil compaction on wet paddocks.

Dual Hydraulic Drive: Reliability Under Load

Commercial baling operations require equipment that works reliably through long continuous operating days during peak harvest. The 9JYY-4.5's dual hydraulic drive system is an engineering commitment to that reliability: two independent circuits share the loading and unloading work, distributing the hydraulic load between them. This dual-circuit design reduces the peak pressure demand on each circuit and extends the service life of hydraulic components operating under repeated high-load cycles.

Pairing with S9000 Series Balers

The 9JYY-4.5 is the recommended transport companion for S9000 Pro and S9000 Classic operations. The S9000 series produces 1,300–1,400 mm bales that fall within the 9JYY-4.5's 1,000–1,400 mm compatibility range. A well-run S9000 operation producing 60–80 bales per hour can create bale accumulation in the paddock if the transport operation cannot keep pace. The 9JYY-4.5's 4,500 kg payload — typically 3–4 S9000-sized bales — provides the transport capacity to stay ahead of a commercial baler operating continuously.

Manufacturer Credentials: Why Ever‑Power

Ever‑Power Forage Baler S.A. is the Argentine entity of an ISO 9001:2015‑certified manufacturer holding over 100 registered technology patents and National High‑Tech Enterprise recognition (Certificate GR202315000192). Two consecutive years of market leadership in the heavy-duty bale transporter category, AAA Credit Enterprise rating, and the AGMA Best Innovation Award 2023 provide independently verified performance and quality credentials. All certifications are available on request for buyer verification.

Our 32,000 m² production facility operates two dedicated production lines producing over 2,000 units annually. CNC laser cutting, robotic welding, and electrostatic coating are standard production processes on every unit. The 9JYY-4.5 Heavy-Duty Round Bale Transporter benefits from the same production standards and quality controls as every other machine in the range.

Agronomic and Operational Fit

The 9JYY-4.5 Heavy-Duty Round Bale Transporter is designed for operations requiring 4,500kg commercial bale logistics capability with 50 kW (68 HP) minimum tractor power. Across Argentine agricultural regions, this covers:

• Buenos Aires Province: High‑rainfall improved pasture systems where handles 1,000-1,400mm diameter bales bale format suits local handling and storage infrastructure.
• Córdoba Province: Mixed cropping systems where 4,500kg commercial bale logistics handling requirements align with the seasonal rotation of this region.
• Santa Fe and Entre Ríos: Intensive livestock and dairy systems where commercial bale transport efficiency for large operations is a primary operational requirement.
• Patagonia and arid zones: Extensive operations where reliable, low‑maintenance equipment is essential due to limited service infrastructure.

Total Cost of Ownership

Purchase price is only the first cost. Annual maintenance on the 9JYY-4.5 Heavy-Duty Round Bale Transporter typically represents 2–4% of purchase price — a range that reflects the reduced maintenance requirements of the camless and axial‑flow design elements where applicable. Downtime cost during peak harvest is reduced by the blockage‑resistance feeding design. Residual value is supported by ISO‑certified build quality and verifiable manufacturer credentials that informed second‑hand buyers recognise.

Contact [email protected] for a 5‑year total cost of ownership comparison for the 9JYY-4.5 Heavy-Duty Round Bale Transporter versus alternatives you are evaluating. We provide this analysis for buyers who request it as part of the quotation process.

Seasonal Integration and Operating Calendar

The 9JYY-4.5 Heavy-Duty Round Bale Transporter's place in your annual operational calendar depends on its specific application. For primary hay and forage equipment, the peak use period is September through April in Argentina's agricultural zones. Pre‑season preparation in August — maintenance inspection, parts pre‑ordering, operator familiarisation — ensures the machine is ready when the season begins.

Off‑season storage should be in covered or semi‑covered conditions. Clean all crop debris from the machine before storage — accumulated organic material retains moisture and accelerates corrosion at contact points. Park with pick‑up in the raised position to relieve pressure on the tine carrier springs. Cover PTO shaft ends to prevent moisture and grit ingress into the shaft splines during storage.

Pre‑Purchase Qualification Checklist

Before placing an order for the 9JYY-4.5 Heavy-Duty Round Bale Transporter, confirm the following with your farming or operating team:

• Your tractor produces at least 50 kW (68 HP) minimum at the PTO — confirm against your tractor's rated specification
• Your annual operational requirement for heavy-duty bale transporter services justifies the capital investment at current prices
• Your storage and handling infrastructure is compatible with the bale format produced by this machine (handles 1,000-1,400mm diameter bales)
• Your operating location has adequate service access — either via our Buenos Aires team or via acceptable road freight for parts supply
• Your seasonal calendar provides adequate operating time to achieve target return on investment from the machine

If any of these items cannot be confirmed, contact our team before ordering — we will help identify the correct machine or configuration for your situation.

Buyer Scenarios

The following scenarios represent common operational contexts for the 9JYY-4.5 Heavy-Duty Round Bale Transporter:

Scenario 1: Owner‑Operator Small Property

A 150–300 hectare owner‑operated mixed farm with one main tractor and a seasonal baling requirement. The 9JYY-4.5 Heavy-Duty Round Bale Transporter's heavy-duty bale transporter capability covers the core baling needs of this operation. Its compatibility with 50 kW (68 HP) minimum tractors matches the typical tractor available on this farm scale. Low‑maintenance design is valued by owner‑operators who service their own equipment.

Scenario 2: Agricultural Contractor

A contractor servicing multiple properties through the season needs reliable, versatile equipment. The 9JYY-4.5 Heavy-Duty Round Bale Transporter's 4,500kg commercial bale logistics handling capability — covering the crop types found across the contractor's client base — reduces the number of machine configurations required. Consistent output quality supports the contractor's commercial relationships with clients who specify density or quality standards.

Scenario 3: Large Integrated Property

A large property running 500–2,000 hectares with multiple tractors and dedicated operators. The 9JYY-4.5 Heavy-Duty Round Bale Transporter fits into the operation's forage chain — commercial bale transport efficiency for large operations — and its ISO‑certified quality and local parts support from Buenos Aires reduces operational risk relative to less‑credentialed alternatives.

Extended Frequently Asked Questions

How many S9000 series bales does the 9JYY-4.5 carry per load?

S9000 series bales (1,300 mm diameter) at commercial density (140–180 kg/m³) weigh approximately 700–900 kg each. The 9JYY‑4.5's 4,500 kg payload accommodates 3 bales at 1,000 kg each or up to 4 bales at lower density. Exact load count depends on your specific bale weight — weigh a representative bale from your operation to calculate per‑load capacity.

What is the recommended tractor for the 9JYY-4.5?

A minimum of 50 kW (68 HP) is required for loaded transport at highway speeds. For field operation including loading and unloading cycles, a 65–80 kW tractor provides more comfortable performance reserve. The hydraulic circuits require a tractor with minimum 16 MPa auxiliary hydraulic pressure — confirm this with your tractor specifications.

What documentation comes with the machine at delivery?

Each machine is delivered with: operator and maintenance manual (English language), warranty certificate, certificate of conformity, parts catalogue, and installation checklist. For export orders, the commercial invoice, certificate of origin, and phytosanitary certificate are provided with the shipping documentation.

How do I order spare parts?

Contact [email protected] with your machine serial number and the part number or description from the parts catalogue. We confirm availability, price, and dispatch time within one business day. Common consumables are stocked locally in Buenos Aires for same‑week dispatch.

Is the machine eligible for Argentine agricultural equipment subsidies or credits?

Contact Argentina's Secretaría de Agricultura, Ganadería y Pesca (SAGyP) or the Banco de la Nación Argentina agricultural lending programmes for current machinery subsidy and credit line eligibility. We provide the technical documentation and certificates of origin required for most application processes on request.

Can I inspect the machine at your Buenos Aires facility before purchase?

Yes. Contact [email protected] to arrange a visit to our Parque Industrial Pilar facility. In‑person inspection is available for buyers considering larger orders or those requiring specific configuration confirmation before order placement.

Manufactured to International Standards

Built to ISO9001:2015 standards across a 32,000 m² certified manufacturing facility, every Ever-Power machine undergoes rigorous independent inspection before dispatch.