Specification	Detail
Model	9LZ-6.0
Wheel Config	12-wheel V-profile
Working Width	6,000 mm
Tines	720 high-tensile spring tines
Power Required	≥25.73 kW / 35 HP
Drive	Ground-driven — no PTO
Productivity	4.2–6.0 ha/hr
Miss Rate	<2%

Accessible Finger Wheel Raking for Small-Medium Operations

The Ever-Power 9LZ-6.0 makes finger wheel rake technology available to farms with tractors as small as 25.73 kW (35 HP). Its 12-wheel V-profile covers a 6,000 mm working width using 720 high-tensile spring tines, and like all Ever-Power finger wheel rakes, it requires no PTO connection — operating entirely from ground contact as the tractor moves forward.

For small and medium farms that have been managing with narrower or less sophisticated raking equipment, the 9LZ-6.0 represents a step up in area coverage and windrow quality without requiring a tractor upgrade. At 4.2–6.0 hectares per hour, it covers ground at a rate that allows a single operator to keep pace with a round baler operating continuously — the critical balance for efficient one-tractor hay operations.

12-Wheel Design: Width and Simplicity

The 12-wheel V-profile on the 9LZ-6.0 distributes the 720 spring tines across 6 metres in the same converging geometry as the larger 9LZD-9.0. The V-formation gathers material from the full 6-metre working width and consolidates it into a central windrow behind the machine, formatted for direct baling pickup.

Ground-driven operation removes the PTO drive requirement, reducing tractor power consumption and eliminating the drive shaft, gearbox, and PTO-side wear components that add to the maintenance profile of driven machines. The 9LZ-6.0's mechanical simplicity makes it one of the most reliable raking machines in its size class — there are fewer components that can fail during peak harvest periods when machine availability is critical.

Application: Small to Medium Hay Properties

The 9LZ-6.0 is the correct raking choice for properties harvesting 100–400 hectares of hay annually with tractors in the 35–65 HP range. It partners well with the 9YG-1.0 and 9YG-1.25 round balers — machines in the same size and tractor-power category. Together, a 9LZ-6.0 and 9YG-1.25 form a well-matched two-machine hay system for medium Argentine farming operations.

Manufacturer Credentials: Why Ever‑Power

Ever‑Power Forage Baler S.A. is the Argentine entity of an ISO 9001:2015‑certified manufacturer holding over 100 registered technology patents and National High‑Tech Enterprise recognition (Certificate GR202315000192). Two consecutive years of market leadership in the 12-wheel finger wheel rake category, AAA Credit Enterprise rating, and the AGMA Best Innovation Award 2023 provide independently verified performance and quality credentials. All certifications are available on request for buyer verification.

Our 32,000 m² production facility operates two dedicated production lines producing over 2,000 units annually. CNC laser cutting, robotic welding, and electrostatic coating are standard production processes on every unit. The 9LZ-6.0 12-Wheel Finger Wheel Rake benefits from the same production standards and quality controls as every other machine in the range.

Agronomic and Operational Fit

The 9LZ-6.0 12-Wheel Finger Wheel Rake is designed for operations requiring 6m coverage at 4.2-6 ha/hr, 35 HP minimum capability with 25.73 kW minimum (35 HP) tractor power. Across Argentine agricultural regions, this covers:

• Buenos Aires Province: High‑rainfall improved pasture systems where 6,000mm working width bale format suits local handling and storage infrastructure.
• Córdoba Province: Mixed cropping systems where 6m coverage at 4.2-6 ha/hr, 35 HP minimum handling requirements align with the seasonal rotation of this region.
• Santa Fe and Entre Ríos: Intensive livestock and dairy systems where accessible finger wheel raking for small farm budgets is a primary operational requirement.
• Patagonia and arid zones: Extensive operations where reliable, low‑maintenance equipment is essential due to limited service infrastructure.

Total Cost of Ownership

Purchase price is only the first cost. Annual maintenance on the 9LZ-6.0 12-Wheel Finger Wheel Rake typically represents 2–4% of purchase price — a range that reflects the reduced maintenance requirements of the camless and axial‑flow design elements where applicable. Downtime cost during peak harvest is reduced by the blockage‑resistance feeding design. Residual value is supported by ISO‑certified build quality and verifiable manufacturer credentials that informed second‑hand buyers recognise.

Contact [email protected] for a 5‑year total cost of ownership comparison for the 9LZ-6.0 12-Wheel Finger Wheel Rake versus alternatives you are evaluating. We provide this analysis for buyers who request it as part of the quotation process.

Seasonal Integration and Operating Calendar

The 9LZ-6.0 12-Wheel Finger Wheel Rake's place in your annual operational calendar depends on its specific application. For primary hay and forage equipment, the peak use period is September through April in Argentina's agricultural zones. Pre‑season preparation in August — maintenance inspection, parts pre‑ordering, operator familiarisation — ensures the machine is ready when the season begins.

Off‑season storage should be in covered or semi‑covered conditions. Clean all crop debris from the machine before storage — accumulated organic material retains moisture and accelerates corrosion at contact points. Park with pick‑up in the raised position to relieve pressure on the tine carrier springs. Cover PTO shaft ends to prevent moisture and grit ingress into the shaft splines during storage.

Pre‑Purchase Qualification Checklist

Before placing an order for the 9LZ-6.0 12-Wheel Finger Wheel Rake, confirm the following with your farming or operating team:

• Your tractor produces at least 25.73 kW minimum (35 HP) at the PTO — confirm against your tractor's rated specification
• Your annual operational requirement for 12-wheel finger wheel rake services justifies the capital investment at current prices
• Your storage and handling infrastructure is compatible with the bale format produced by this machine (6,000mm working width)
• Your operating location has adequate service access — either via our Buenos Aires team or via acceptable road freight for parts supply
• Your seasonal calendar provides adequate operating time to achieve target return on investment from the machine

If any of these items cannot be confirmed, contact our team before ordering — we will help identify the correct machine or configuration for your situation.

Buyer Scenarios

The following scenarios represent common operational contexts for the 9LZ-6.0 12-Wheel Finger Wheel Rake:

Scenario 1: Owner‑Operator Small Property

A 150–300 hectare owner‑operated mixed farm with one main tractor and a seasonal baling requirement. The 9LZ-6.0 12-Wheel Finger Wheel Rake's 12-wheel finger wheel rake capability covers the core baling needs of this operation. Its compatibility with 25.73 kW minimum (35 HP) tractors matches the typical tractor available on this farm scale. Low‑maintenance design is valued by owner‑operators who service their own equipment.

Scenario 2: Agricultural Contractor

A contractor servicing multiple properties through the season needs reliable, versatile equipment. The 9LZ-6.0 12-Wheel Finger Wheel Rake's 6m coverage at 4.2-6 ha/hr, 35 HP minimum handling capability — covering the crop types found across the contractor's client base — reduces the number of machine configurations required. Consistent output quality supports the contractor's commercial relationships with clients who specify density or quality standards.

Scenario 3: Large Integrated Property

A large property running 500–2,000 hectares with multiple tractors and dedicated operators. The 9LZ-6.0 12-Wheel Finger Wheel Rake fits into the operation's forage chain — accessible finger wheel raking for small farm budgets — and its ISO‑certified quality and local parts support from Buenos Aires reduces operational risk relative to less‑credentialed alternatives.

Extended Frequently Asked Questions

Is the 9LZ-6.0 suitable for silage windrow formation?

Yes — the finger wheel action produces fluffy, aerated windrows suitable for both hay drying and silage windrow formation. For silage, the windrow should be baled promptly after reaching target wilt level — the open windrow structure aids wilting speed.

What tractor brands and models are compatible with the 9LZ-6.0?

Any tractor producing 25.73 kW (35 HP) or more with a standard drawbar hitch is compatible. The machine connects via drawbar — no hydraulic connections are required for operation. Hydraulic connections may be used for transport width adjustment if equipped. Contact us with your tractor make and model for specific compatibility confirmation.

What documentation comes with the machine at delivery?

Each machine is delivered with: operator and maintenance manual (English language), warranty certificate, certificate of conformity, parts catalogue, and installation checklist. For export orders, the commercial invoice, certificate of origin, and phytosanitary certificate are provided with the shipping documentation.

How do I order spare parts?

Contact [email protected] with your machine serial number and the part number or description from the parts catalogue. We confirm availability, price, and dispatch time within one business day. Common consumables are stocked locally in Buenos Aires for same‑week dispatch.

Is the machine eligible for Argentine agricultural equipment subsidies or credits?

Contact Argentina's Secretaría de Agricultura, Ganadería y Pesca (SAGyP) or the Banco de la Nación Argentina agricultural lending programmes for current machinery subsidy and credit line eligibility. We provide the technical documentation and certificates of origin required for most application processes on request.

Can I inspect the machine at your Buenos Aires facility before purchase?

Yes. Contact [email protected] to arrange a visit to our Parque Industrial Pilar facility. In‑person inspection is available for buyers considering larger orders or those requiring specific configuration confirmation before order placement.

Manufactured to International Standards

Built to ISO9001:2015 standards across a 32,000 m² certified manufacturing facility, every Ever-Power machine undergoes rigorous independent inspection before dispatch.