Specification	Detail
Model	9LH-12
Working Width	12,000 mm
Tines	168 x 65Mn spring steel
Power Required	25–44 kW / 35–60 HP
Productivity	6–12 ha/hr
Missed Raking Rate	<3%
Hydraulic Control	Standard
Machine Weight	Approx. 900 kg

Twelve Metres of Raking Width from a 35 HP Tractor

The Ever-Power 9LH-12 Transverse Hay Rake achieves something that seems counterintuitive: a 12,000 mm working width from a tractor producing just 25–44 kW (35–60 HP). This exceptional width-to-power ratio is possible because the transverse rake design uses mechanical ground engagement rather than powered discs or wheels — the machine is driven forward by the tractor, and the 168 spring tines do their work through physical contact with the ground surface and crop material.

At 6–12 hectares per hour, the 9LH-12 is one of the highest-productivity raking solutions available in its price range. An operation that previously required multiple raking passes with a narrower machine can complete the same paddock in a single pass, freeing the tractor and operator for other tasks. For large hay properties managing hundreds of hectares through a short harvest window, this throughput advantage directly translates to more hectares harvested per day.

168 Spring Steel Tines: Thorough Collection, Gentle on Roots

The 9LH-12's 168 tines are manufactured from 65Mn spring steel — a high-tensile alloy selected for its combination of flexibility and fatigue resistance. Spring steel tines deflect when they encounter embedded stones or hard ground features, then return to working position without permanent deformation. This behaviour protects both the tine and the underlying soil structure, preventing the root damage and soil disturbance that rigid rake designs can cause.

The tine density across the 12-metre working width — 14 tines per metre on average — produces thorough crop collection with a missed raking rate below 3%. Crop left on the ground after raking represents a direct loss of sellable hay and a source of potential contamination in the next cut. The 9LH-12's tine density minimises both issues.

Windrow Quality and Baling Compatibility

The 9LH-12 produces fluffy, well-aerated windrows that allow air circulation through the raked material, promoting continued drying after raking. The tine action lifts and repositions the crop without compressing it into a dense mat — a critical quality factor for operations targeting specific moisture content for hay making or silage production.

The windrow width produced by the 9LH-12 can be adjusted by varying the raking angle of the tine sections. Narrower windrows concentrate material for more consistent baler feeding with the 9YG-1.0 and 9YG-1.25 balers. Wider windrows allow additional drying time without compressing the crop. This flexibility in windrow formation allows the operator to adapt to daily weather conditions — wider windrows when additional drying is needed, narrower when the paddock is ready to bale immediately.

Manufacturer Credentials: Why Ever‑Power

Ever‑Power Forage Baler S.A. is the Argentine entity of an ISO 9001:2015‑certified manufacturer holding over 100 registered technology patents and National High‑Tech Enterprise recognition (Certificate GR202315000192). Two consecutive years of market leadership in the 12m transverse hay rake category, AAA Credit Enterprise rating, and the AGMA Best Innovation Award 2023 provide independently verified performance and quality credentials. All certifications are available on request for buyer verification.

Our 32,000 m² production facility operates two dedicated production lines producing over 2,000 units annually. CNC laser cutting, robotic welding, and electrostatic coating are standard production processes on every unit. The 9LH-12 Transverse Hay Rake benefits from the same production standards and quality controls as every other machine in the range.

Agronomic and Operational Fit

The 9LH-12 Transverse Hay Rake is designed for operations requiring 12m high-throughput raking at 6-12 ha/hr capability with 25–44 kW (35–60 HP) tractor power. Across Argentine agricultural regions, this covers:

• Buenos Aires Province: High‑rainfall improved pasture systems where 12,000mm working width bale format suits local handling and storage infrastructure.
• Córdoba Province: Mixed cropping systems where 12m high-throughput raking at 6-12 ha/hr handling requirements align with the seasonal rotation of this region.
• Santa Fe and Entre Ríos: Intensive livestock and dairy systems where maximising raking throughput with minimal tractor power is a primary operational requirement.
• Patagonia and arid zones: Extensive operations where reliable, low‑maintenance equipment is essential due to limited service infrastructure.

Total Cost of Ownership

Purchase price is only the first cost. Annual maintenance on the 9LH-12 Transverse Hay Rake typically represents 2–4% of purchase price — a range that reflects the reduced maintenance requirements of the camless and axial‑flow design elements where applicable. Downtime cost during peak harvest is reduced by the blockage‑resistance feeding design. Residual value is supported by ISO‑certified build quality and verifiable manufacturer credentials that informed second‑hand buyers recognise.

Contact [email protected] for a 5‑year total cost of ownership comparison for the 9LH-12 Transverse Hay Rake versus alternatives you are evaluating. We provide this analysis for buyers who request it as part of the quotation process.

Seasonal Integration and Operating Calendar

The 9LH-12 Transverse Hay Rake's place in your annual operational calendar depends on its specific application. For primary hay and forage equipment, the peak use period is September through April in Argentina's agricultural zones. Pre‑season preparation in August — maintenance inspection, parts pre‑ordering, operator familiarisation — ensures the machine is ready when the season begins.

Off‑season storage should be in covered or semi‑covered conditions. Clean all crop debris from the machine before storage — accumulated organic material retains moisture and accelerates corrosion at contact points. Park with pick‑up in the raised position to relieve pressure on the tine carrier springs. Cover PTO shaft ends to prevent moisture and grit ingress into the shaft splines during storage.

Pre‑Purchase Qualification Checklist

Before placing an order for the 9LH-12 Transverse Hay Rake, confirm the following with your farming or operating team:

• Your tractor produces at least 25–44 kW (35–60 HP) at the PTO — confirm against your tractor's rated specification
• Your annual operational requirement for 12m transverse hay rake services justifies the capital investment at current prices
• Your storage and handling infrastructure is compatible with the bale format produced by this machine (12,000mm working width)
• Your operating location has adequate service access — either via our Buenos Aires team or via acceptable road freight for parts supply
• Your seasonal calendar provides adequate operating time to achieve target return on investment from the machine

If any of these items cannot be confirmed, contact our team before ordering — we will help identify the correct machine or configuration for your situation.

Buyer Scenarios

The following scenarios represent common operational contexts for the 9LH-12 Transverse Hay Rake:

Scenario 1: Owner‑Operator Small Property

A 150–300 hectare owner‑operated mixed farm with one main tractor and a seasonal baling requirement. The 9LH-12 Transverse Hay Rake's 12m transverse hay rake capability covers the core baling needs of this operation. Its compatibility with 25–44 kW (35–60 HP) tractors matches the typical tractor available on this farm scale. Low‑maintenance design is valued by owner‑operators who service their own equipment.

Scenario 2: Agricultural Contractor

A contractor servicing multiple properties through the season needs reliable, versatile equipment. The 9LH-12 Transverse Hay Rake's 12m high-throughput raking at 6-12 ha/hr handling capability — covering the crop types found across the contractor's client base — reduces the number of machine configurations required. Consistent output quality supports the contractor's commercial relationships with clients who specify density or quality standards.

Scenario 3: Large Integrated Property

A large property running 500–2,000 hectares with multiple tractors and dedicated operators. The 9LH-12 Transverse Hay Rake fits into the operation's forage chain — maximising raking throughput with minimal tractor power — and its ISO‑certified quality and local parts support from Buenos Aires reduces operational risk relative to less‑credentialed alternatives.

Extended Frequently Asked Questions

Can the 9LH-12 handle wet conditions after rain?

The spring steel tines handle slightly damp material without issues. In heavily waterlogged conditions where crop is partially submerged, performance will be reduced and the risk of leaving material on the ground increases. Wait for adequate surface drying before raking in post‑rain conditions.

What is the transport width of the 9LH-12 for road travel?

The 9LH‑12 folds for road transport via the hydraulic control system. Transport width conforms to standard road transport requirements. Confirm specific transport dimensions with our technical team before transport planning if you have specific route restrictions.

What documentation comes with the machine at delivery?

Each machine is delivered with: operator and maintenance manual (English language), warranty certificate, certificate of conformity, parts catalogue, and installation checklist. For export orders, the commercial invoice, certificate of origin, and phytosanitary certificate are provided with the shipping documentation.

How do I order spare parts?

Contact [email protected] with your machine serial number and the part number or description from the parts catalogue. We confirm availability, price, and dispatch time within one business day. Common consumables are stocked locally in Buenos Aires for same‑week dispatch.

Is the machine eligible for Argentine agricultural equipment subsidies or credits?

Contact Argentina's Secretaría de Agricultura, Ganadería y Pesca (SAGyP) or the Banco de la Nación Argentina agricultural lending programmes for current machinery subsidy and credit line eligibility. We provide the technical documentation and certificates of origin required for most application processes on request.

Can I inspect the machine at your Buenos Aires facility before purchase?

Yes. Contact [email protected] to arrange a visit to our Parque Industrial Pilar facility. In‑person inspection is available for buyers considering larger orders or those requiring specific configuration confirmation before order placement.

Manufactured to International Standards

With over 100 registered technology patents and ISO9001:2015 certification, Ever-Power combines independent R&D capability with automated production for consistent build quality at scale.