Specification	Detail
Model	9LZD-9.0
Wheel Config	17-wheel V-profile
Working Width	9,000 mm
Tines	1,020 high-tensile spring tines
Power Required	55–75 kW / 75–102 HP
Drive	Ground-driven — no PTO
Productivity	7.2–9.0 ha/hr
Miss Rate	<2%
Windrow Width	0.8–1.2 m

The High-Capacity Finger Wheel Rake for Commercial Operations

The Ever-Power 9LZD-9.0 is the highest-capacity finger wheel rake in the Ever-Power range: 17 wheels, 1,020 tines, 9,000 mm working width, and no PTO required. The V-profile 17-wheel configuration is designed for commercial hay operations and large livestock properties where raking throughput is a bottleneck — where the balers are waiting for raked windrows rather than the other way around.

Ground-driven design means the 9LZD-9.0's wheels are powered entirely by their contact with the ground surface as the tractor moves forward. There is no mechanical connection to the tractor's PTO required — only the drawbar hitch. This simplicity of design eliminates a category of mechanical complexity entirely, removing the drive shaft, gearbox, and PTO-side maintenance requirements that add cost and downtime to driven alternatives.

17-Wheel V-Profile: Engineering for Width and Windrow Quality

The V-profile arrangement of the 9LZD-9.0's 17 wheels positions the wheels in two angled rows that converge towards a central discharge point. As the machine moves forward, each wheel gathers material from its section of the working width and passes it rearward toward the consolidation point. The result is a single, well-formed windrow positioned centrally behind the machine — ready for baling without further adjustment.

The 1,020 individual spring tines distributed across 17 wheels provide the highest tine density of any machine in the Ever-Power rake range. This density ensures thorough collection across the full 9-metre width, maintaining the less-than-2% missed raking rate that the 9LZD-9.0 is specified to achieve.

Windrow Formation and Baler Compatibility

The 9LZD-9.0 produces windrows of 0.8–1.2 metres width depending on operating speed and crop density. This windrow format is compatible with the full range of Ever-Power round balers, from the compact 9YG-1.0 to the S9000 Pro. For operations pairing the 9LZD-9.0 with large-format balers like the S9000 series, the consistent windrow formation and predictable placement behind the machine allows the baler operator to maintain a steady working speed without the pickup path variation that comes from inconsistently formed windrows.

Manufacturer Credentials: Why Ever‑Power

Ever‑Power Forage Baler S.A. is the Argentine entity of an ISO 9001:2015‑certified manufacturer holding over 100 registered technology patents and National High‑Tech Enterprise recognition (Certificate GR202315000192). Two consecutive years of market leadership in the 17-wheel finger wheel rake category, AAA Credit Enterprise rating, and the AGMA Best Innovation Award 2023 provide independently verified performance and quality credentials. All certifications are available on request for buyer verification.

Our 32,000 m² production facility operates two dedicated production lines producing over 2,000 units annually. CNC laser cutting, robotic welding, and electrostatic coating are standard production processes on every unit. The 9LZD-9.0 17-Wheel Finger Wheel Rake benefits from the same production standards and quality controls as every other machine in the range.

Agronomic and Operational Fit

The 9LZD-9.0 17-Wheel Finger Wheel Rake is designed for operations requiring 9m coverage at 7.2-9 ha/hr, no PTO capability with 55–75 kW (75–102 HP) tractor power. Across Argentine agricultural regions, this covers:

• Buenos Aires Province: High‑rainfall improved pasture systems where 9,000mm V-profile working width bale format suits local handling and storage infrastructure.
• Córdoba Province: Mixed cropping systems where 9m coverage at 7.2-9 ha/hr, no PTO handling requirements align with the seasonal rotation of this region.
• Santa Fe and Entre Ríos: Intensive livestock and dairy systems where commercial-scale raking with zero PTO fuel cost is a primary operational requirement.
• Patagonia and arid zones: Extensive operations where reliable, low‑maintenance equipment is essential due to limited service infrastructure.

Total Cost of Ownership

Purchase price is only the first cost. Annual maintenance on the 9LZD-9.0 17-Wheel Finger Wheel Rake typically represents 2–4% of purchase price — a range that reflects the reduced maintenance requirements of the camless and axial‑flow design elements where applicable. Downtime cost during peak harvest is reduced by the blockage‑resistance feeding design. Residual value is supported by ISO‑certified build quality and verifiable manufacturer credentials that informed second‑hand buyers recognise.

Contact [email protected] for a 5‑year total cost of ownership comparison for the 9LZD-9.0 17-Wheel Finger Wheel Rake versus alternatives you are evaluating. We provide this analysis for buyers who request it as part of the quotation process.

Seasonal Integration and Operating Calendar

The 9LZD-9.0 17-Wheel Finger Wheel Rake's place in your annual operational calendar depends on its specific application. For primary hay and forage equipment, the peak use period is September through April in Argentina's agricultural zones. Pre‑season preparation in August — maintenance inspection, parts pre‑ordering, operator familiarisation — ensures the machine is ready when the season begins.

Off‑season storage should be in covered or semi‑covered conditions. Clean all crop debris from the machine before storage — accumulated organic material retains moisture and accelerates corrosion at contact points. Park with pick‑up in the raised position to relieve pressure on the tine carrier springs. Cover PTO shaft ends to prevent moisture and grit ingress into the shaft splines during storage.

Pre‑Purchase Qualification Checklist

Before placing an order for the 9LZD-9.0 17-Wheel Finger Wheel Rake, confirm the following with your farming or operating team:

• Your tractor produces at least 55–75 kW (75–102 HP) at the PTO — confirm against your tractor's rated specification
• Your annual operational requirement for 17-wheel finger wheel rake services justifies the capital investment at current prices
• Your storage and handling infrastructure is compatible with the bale format produced by this machine (9,000mm V-profile working width)
• Your operating location has adequate service access — either via our Buenos Aires team or via acceptable road freight for parts supply
• Your seasonal calendar provides adequate operating time to achieve target return on investment from the machine

If any of these items cannot be confirmed, contact our team before ordering — we will help identify the correct machine or configuration for your situation.

Buyer Scenarios

The following scenarios represent common operational contexts for the 9LZD-9.0 17-Wheel Finger Wheel Rake:

Scenario 1: Owner‑Operator Small Property

A 150–300 hectare owner‑operated mixed farm with one main tractor and a seasonal baling requirement. The 9LZD-9.0 17-Wheel Finger Wheel Rake's 17-wheel finger wheel rake capability covers the core baling needs of this operation. Its compatibility with 55–75 kW (75–102 HP) tractors matches the typical tractor available on this farm scale. Low‑maintenance design is valued by owner‑operators who service their own equipment.

Scenario 2: Agricultural Contractor

A contractor servicing multiple properties through the season needs reliable, versatile equipment. The 9LZD-9.0 17-Wheel Finger Wheel Rake's 9m coverage at 7.2-9 ha/hr, no PTO handling capability — covering the crop types found across the contractor's client base — reduces the number of machine configurations required. Consistent output quality supports the contractor's commercial relationships with clients who specify density or quality standards.

Scenario 3: Large Integrated Property

A large property running 500–2,000 hectares with multiple tractors and dedicated operators. The 9LZD-9.0 17-Wheel Finger Wheel Rake fits into the operation's forage chain — commercial-scale raking with zero PTO fuel cost — and its ISO‑certified quality and local parts support from Buenos Aires reduces operational risk relative to less‑credentialed alternatives.

Extended Frequently Asked Questions

How does a ground-driven rake work?

The finger wheels are mounted on spindles that rotate as the wheels contact the ground surface. As the tractor moves forward, the wheels roll, and their rotation drives the tines through the crop material. There is no mechanical connection to the tractor's PTO — the ground contact provides all the driving force. This means zero PTO power consumption and no PTO shaft to maintain.

What happens if the ground is too hard or dry for the wheels to engage?

In very hard, dry soil conditions, the finger wheel tines may not penetrate deeply enough to gather low‑lying windrow material completely. In these conditions, the tine angle can be adjusted to increase the downward pressure on the tines. Contact our technical team for adjustment guidance specific to your soil conditions.

What documentation comes with the machine at delivery?

Each machine is delivered with: operator and maintenance manual (English language), warranty certificate, certificate of conformity, parts catalogue, and installation checklist. For export orders, the commercial invoice, certificate of origin, and phytosanitary certificate are provided with the shipping documentation.

How do I order spare parts?

Contact [email protected] with your machine serial number and the part number or description from the parts catalogue. We confirm availability, price, and dispatch time within one business day. Common consumables are stocked locally in Buenos Aires for same‑week dispatch.

Is the machine eligible for Argentine agricultural equipment subsidies or credits?

Contact Argentina's Secretaría de Agricultura, Ganadería y Pesca (SAGyP) or the Banco de la Nación Argentina agricultural lending programmes for current machinery subsidy and credit line eligibility. We provide the technical documentation and certificates of origin required for most application processes on request.

Can I inspect the machine at your Buenos Aires facility before purchase?

Yes. Contact [email protected] to arrange a visit to our Parque Industrial Pilar facility. In‑person inspection is available for buyers considering larger orders or those requiring specific configuration confirmation before order placement.

Manufactured to International Standards

ISO9001:2015 certified, AAA credit rated, and recognised as a National High-Tech Enterprise — Ever-Power's manufacturing credentials are independently verified and publicly certified.